GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
411 Posts
Discussion Starter #1
Can someone repost the how to reprogram the remote.

Traded off our Honda CRV for a new Honda Pilot and the dealer gave me the extra remote from the CRV to use on the 1800 as a spare.



Thanks,
 

·
Chard Member
Joined
·
12,966 Posts
Keyless Transmitter Programming GL1800

1. Turn the ignition switch on - between one and four seconds and press the trunk "Pop-Up" button on the transmitter while aiming the transmitter at the trunk. Between one and four seconds, turn the ignition switch off. Note: keep the timing between one and four seconds, too fast or too slow will cause the control unit to lose the stored codes.

2. Between one and four seconds, turn the ignition switch on. Between one and four seconds, press the trunk " Pop-Up " button on the transmitter while aiming the transmitter at the trunk. Between one and four seconds, turn the ignition switch off.

3. Between one and four seconds, turn the ignition switch on. Between one and four seconds, press the trunk " Pop-Up " button on the transmitter while aiming the transmitter at the trunk. Between one and four seconds, turn the ignition switch off.

4. Between one and four seconds, turn the ignition switch on. Between one and four seconds, press the trunk " Pop-Up " button on the transmitter while aiming the transmitter at the trunk. Leave the ignition switch on.

5. Within 15 seconds, aim the transmitter (up to three) whose codes you want to store at the trunk and press the " Pop-Up " button once on each transmitter.

6. Between one and four seconds, turn the ignition switch off.

7. Confirm proper operation with the new code(s).

YOU'RE WELCOME!
 

·
Registered
Joined
·
411 Posts
Discussion Starter #3
Red,

Thank's for the reply
 
1 - 3 of 3 Posts
Top