GL1800Riders Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter #1
In trying to install chrome radiator grills I have bent back one of the lower tabs on radiator. With the side faring loose i cannot bend it out enough to get to the tab to straighten it out. I thought if I could remove the whole side panel i could get it done. Now with the panel below windshield off it looks to me like the side panels don't come off separately. Looks like whole faring is one piece from one side to the other.. I may look for a long pliers with a 90 degree bend toward the end I may be able to straighten the tab.. I don't know that I want to tackle the whole faring with all the screws and connectors.. Ideas anyone?
 

·
Registered
Joined
·
1,361 Posts
Grills can be added without removing the faring. Remove the trim strips and the bolts from the side of the faring to provide extra clearance. Push the slots over the tabs on the radiator. This harder to describe than to actually perform.
 
1 - 2 of 2 Posts
Top