GL1800Riders Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Every once in a while the reverse function will not fully engauge. It sounds like the gears are not fully meshed and the bike just jerks. I re-set the rev switch and all is fine.

Thanks for any info.

Lee
 

·
Vendor
Joined
·
17,780 Posts
Here is what to try. Remove, clean, inspect and lube the reverse shift arm assembly. Also, inspect and adjust the reverse cables.
 
1 - 4 of 4 Posts
Top