GL1800Riders Forums banner
1 - 2 of 2 Posts

·
Vendor
Joined
·
22,559 Posts
The audio harnesses are prone to picking up electrical noise. You probably routed your wire too close to the headset harness. Try relocating either the headset harness or the wire to your lights. Remove the glove box, start the bike and put on you helmet and start moving the wires around and see if you can't find a position that gets rid of the noise.

Ground loop isolators are also notorious for being noise magnets, and you have to position them away from electrical harnesses or ignition wires or the alternator itself.
 
1 - 2 of 2 Posts
Top