GL1800Riders Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2,666 Posts
Discussion Starter #1
Put a RIVCO hitch on the bike and in the process did remove the Amp box's two 8mm bolts to place the light controller. The manual implies these two bolts are the only thing holding the box in place, with the forward part of the box slid into a groove of the forward aspect of the rear fender.

However, I could not get the box to pull out at all. Could not find anything else obviously holding the box. Is there something I'm missing?
 
1 - 1 of 1 Posts
Top