GL1800Riders Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
315 Posts
Discussion Starter #1
just returned from a ride to Charleston s.c, found out my running lights(tail lights), are going off and on. i assume it's the ground that is loose, where would i find that ground. fuse is good and i replaced it anyway. nothing else is effected.. thanks for any help.
 

·
Vendor
Joined
·
17,787 Posts
Year ???
Is this a 2whl or 3 ???

Are your turn signal bright and working correctly ???
 

·
Registered
Joined
·
315 Posts
Discussion Starter #3
sorry forgot the important stuff,

2014 level 1 yes everything else works, brake lights signal lights,

thanks
 

·
Registered
Joined
·
1,510 Posts
The usual ground problem on the back of the Wing usually results in the current going through the turn signals to ground. This is typically in the plug under the rear of the seat. Since your other lights are working normally I would look for a loose connection, possibly in the same plug if it has been disconnected sometime. It is not uncommon for a pin to get pushed out of the plug and could be making intermittent connection?
 

·
Registered
Joined
·
7,616 Posts
sorry forgot the important stuff,

2014 level 1 yes everything else works, brake lights signal lights,

thanks
You have a great signature. Good idea to add your year and model to it!
 
1 - 6 of 6 Posts
Top