GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
571 Posts
Discussion Starter #1
When I bought my 03 GL1800 it already had the Showchrome trunk rack fitted.
I've read some reports that suggest fitting spacers between the trunk lid and the inner liner.
I've checked and there are no spacers on mine, is this something I should put right by fitting some spacers and if so what is the best thing to use?
I should mention that there is no evidence of cracking on my lid.
 

·
Registered
Joined
·
1,105 Posts
Large fender washers, JB Weld or RTV siliconed in place. And because of the added thickness, you may need longer screws which you can get at ACE Hardware.
 

·
Registered
Joined
·
213 Posts
It's only a little void between the two skins. You can make the washers out of almost any rigid plastic.
You can still use the original screws

mac
 
1 - 3 of 3 Posts
Top