GL1800Riders Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,136 Posts
Wing world technical editor says to try silicone spray. The Honda dealer says NOT to use silicone spray, but they also don't have any other recommendation. I'd be likely to try a little wd-40. With a rag in the general area to keep the stuff from dripping. I did have a problem with my CB transmit switch, and a little squirt of wd-40 freed it up and it's working fine now.

You might have luck just working the switch and buttons by pressing them repeatedly. Whatever is stuck might un-stick that way.
 
1 - 1 of 1 Posts
Top