GL1800Riders Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
503 Posts
Cupping and wobble

If you read enough you will get 10000 different answers to these questions. Some think new springs is the answerer some taper bearings, fork brace,different brand of tires, back tire all of these may be true. I would start with the taper bearing and go from there. In all reality all heavy bikes have the tendency to cup tires and wobble. I put in the tapper bearing and no more wobble had it before the bearing and lost it after the bearing was installed. Same tires same springs and no fork brace. I keep my tire pressure at 42 and 44 when two up have a small amount of cupping at 11000 miles on the frt change back tire early but I had another one already mounted Metz on both ends will try stone on frt when need to change.

Sonney
 
1 - 1 of 1 Posts
Top