GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
271 Posts
Discussion Starter #1
Made a little adjustment to the valve covers on the wing. These are the first good pictures of it.

The ugly 'HONDA' is gone!!



 

·
Registered
Joined
·
271 Posts
Discussion Starter #3
Drilled a 3/16" hole and then used a 'V' / flat head screw countersink bit. Ran the wires into the space below the valve cover where the spark plug wires are. Total cost was $5.99 for the lights at Auto Zone.



 
1 - 3 of 3 Posts
Top