GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
985 Posts
Discussion Starter #1
Parts as per below.

Ram-B-125BU (unpkd Ram Curved Yoke Mount Plate). About $14
Ram-B-201U-A (Hold two balls size B) with handle to tighten. I replaced with locking handle. About $14.
Touratech locking GPS Mount for Garmin 665/660 and others $179 plus shipping.
Ram Locking bolt/tightening knob about $20
Plastic square block mount. (Made from Windbender Windshield, Given to me by Dayle at Windbender for my experiment).
Stainless steel bolts 4ea 6mm allen head with locking bolt. Painted block bolts black.

Also rubberized two sided tape on inside of plates to add a little buffer and stop dirt rubbing into Windshield.
Also small thickness Rubber bumper on dash to prevent ram mount rubbing.

So about $250 Dollars done this way. I chose Touratech Locking Mount only because this bike going to Europe. If at home no concern about quick theft. So I could have saved $200 and just mounted on Garmin provided mount.

Next project is the visor mount.

photo (14).jpg Plate bolts to windbender.jpg Ram Mounts.jpg Tourateck mount.jpg Tourateck on WIndbender.jpg
 

·
Registered
Joined
·
288 Posts
Very nice! I have to correct one thing. the curved yoke is part #Ram-B-125BU not BY.
 

·
Registered
Joined
·
985 Posts
Discussion Starter #3
Corrected.
 
1 - 3 of 3 Posts
Top