GL1800Riders Forums banner

Speed-O-Healer

1 reading
2.5K views 6 replies 7 participants last post by  huntch  
#1 ·
Has anyone installed one on a 12-17 ? Looking at their site it's confusing, does the correct harness for the wing come with the V4 or is that ordered seperate ?
Just installed Henry's final drive and need to correct the speedometer, I installed my car GPS temporairly on the bike and found the speed reading slow by 6kph at 50 and 10kph at 80 and 12kph at 110.
 
#2 ·
I don't see anything confusing on 12oclocklabs' website concerning their version of a speed healer for your bike. It should be plug & play for you. Model H1. These are usually a bit less expensive than the Speedhealer brand, and I have had them installed on three of our bikes for several years now w/o any problems whatsoever (knock on wood). Programming can be a bit trickier than the Speedhealer brand if you don't follow the instructions the 1st time through.

SpeedoDRD (12oclocklabs.com)

Give them a look-see, and see what you think.
 
#6 ·
I installed one on my 2007 while my bike was disassembled for paint.

If you're not too savvy with math, it could be confusing.

But, I got everything I needed with the "kit" and calculations and programming went without an issue.

Went for a ride with Garmin car GPS and speed were spot on on all speed I normally ride...45, 55, 65, 70MPH where they used to be off @5MPH